>B.O.S Library > Factory documents

>> 1948 WR Specifications & Instructions


About this document

Notice document does not mention WRTT model or configuration specifically as some later "WR Specifications and instructions" do. It indicates that the WR comes with front and rear fenders and all the WRTT type options. The WR "Dirt track" light chromolly frame did not arrive till later that same year. That is when the factory began to offer both the WRTT and the WR[DT]. Click on the pics for a much larger version optimized for print.

Page 1
General 1948 specifications
and instructions 1		 Page 2
General 1948 specifications
and instructions 2		 Page 3
Gear ratios with 3/8"
pitch front chain 1
 Page 4
Gear ratios with 3/8"
pitch front chain 2
Page 5
Gear ratios with 3/8"
pitch front chain 3		 Page 6
Gear ratios with 1/2"
pitch front chain 1		 Page 7
Gear ratios with 1/2"
pitch front chain 2		 Page 8
Gear ratios with 1/2"
pitch front chain 3
 
Page 9
Flat tappet specs
and settings		 Page 10
Ball bearing cams
and shafts specs		 Page 11
Wico magneto setting instructions [vertical model]